FREE Shipping On Order Over 80$

Mi-T-M 1400 PSI @ 1.5 GPM NEMA 5-15P Direct Drive Triplex Crankshaft  Pump  Cold Water  Electric  Portable Pressure Washer with  Mister Combination
<iframe width="956" height="538" src="https://www.youtube.com/embed/hvIrneauoqM" frameborder="0" allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>

Mi-T-M 1400 PSI @ 1.5 GPM NEMA 5-15P Direct Drive Triplex Crankshaft Pump Cold Water Electric Portable Pressure Washer with Mister Combination

Regular price
$1,137.51
Sale price
$1,137.51
Shipping calculated at checkout.
Quantity must be 1 or more


CM-1400-0MEC-M

Tackle cleaning jobs around your property with the electric CM Series pressure washer. Easy-to-use and lightweight, this pressure washer is the perfect tool for any small business or homeowner.

Pump: Thermal relief valve · In-line water strainer · Built-in low pressure detergent injector · Oil drain, fill port and sight glass

Motor: Totally enclosed fan-cooled electric motor · 35-foot power cord with GFCI and 15-amp plug

Frame: Powder coated steel mounting plate with center balanced lift and four rubber isolators

  • Can be used as a pressure washer or low pressure disinfecting mister
    Pressure washer is 1,400 psi @ 1.5 gpm
    Mister is 350 psi @ .049 gpm / 2.93 gph
  • Electric motor, 120 volt, 13.5 amps, plugs in to a standard wall outlet
Unit will include:
  • ¼” X 75’ high pressure hose with quick connects
  • Trigger gun and wand with quick connects to be used with the pressure washer only
  • Additional trigger gun with misting nozzle to be used when misting only (not to be used for high pressure)
We also have an accessory kit so that 2 misting guns can be used at the same time (not to be used for high pressure). This kit includes:
  • Dual gun misting adapter
  • ¼” X 75 high pressure hose with quick connects
  • Trigger gun with misting nozzle

Limited Warranties:
1 year pump x 1 year electric motor

Certification:
CSA Certified - US and Canada

SAFETY INSTRUCTIONS
  • Follow the manufacturer’s safety recommendations for wearing proper PPE.
  • Thoroughly read the operating manual of the sprayer before using.
  • Review and follow the recommendations contained in the manufacturers material and product safety data sheets.
  • When using any materials that contain Bleach, Hydrogen Peroxide, Quaternary Ammonia, Sodium Hypochlorite, Ethanol, or Hypochlorous Acid, the units should be flushed immediately after each use. Most of these materials are highly corrosive and should never be left in the pumps longer than 15 minutes after spraying.
  • The sprayer should always be located outside the area that you are spraying at all times.
  • Check the filters in the gun and sprayer daily after each use and clean or replace as necessary.
  • Do not spray any electrical devices and equipment.

Net Orders Checkout

Item Price Qty Total
Subtotal $0.00
Shipping
Total

Shipping Address

Shipping Methods