FREE Shipping On Order Over 80$

Bullard Electric Driven Pump - 16 CFM @ 5 PSIG Three Phase - Hazardous Duty

Bullard Electric Driven Pump - 16 CFM @ 5 PSIG Three Phase - Hazardous Duty

Regular price
$3,103.78
Sale price
$3,103.78
Shipping calculated at checkout.
Quantity must be 1 or more


EDP16HAZ Free-Air® Pump

Supplies air for two hood-style or three half or full face mask airline respirators. Air flow is 16 cfm at 5 psig. Also available in a hazardous-duty version (EDP16HAZ).

When placed in a clean air environment, Bullard Free-Air® pumps offer a low-cost means of supplying clean, breathable air to respirator wearers working in contaminated environments up to 300 feet away from the pump. They are easy to operate and maintain. Free-Air pumps do not require temperature alarms, CO monitors or airline filters, so they can be a cost-effective alternative to compressed air.

  • Completely mobile and portable
  • No expensive installation costs
  • Models available to suit any application
  • Models that support up to ten respirators
  • Available in versions to support climate control devices

Specifications

  • Two to Three person Hazardous Duty pump
  • Portable (includes handles) and optional wheels
  • Oil-less – eliminates OSHA required CO monitors, temperature alarms, airline filters
  • 1 1/2 HP electric-driven pump
  • Made in the USA
  • Capacity to supply air to:
    - two hood-style; or
    - three half or full face mask airline respirators
  • Pressure gauge (0-30 psig)
  • Two 1/2” Industrial Interchange (Hansen compatible) quick-disconnect coupler
  • Weights 98 lbs (44.5 kg)
  • Air flow of 16 cfm at 5 psig. (453 lpm @ 34kPa)
  • Dimensions: 14” wide x 28” long x 6” high
  • Carbon vans are replaceable and need no adjustment, lasting for 5,000 – 15,000 operational hours if properly maintained
  • Maximum Outlet Air pressure of 30 psig
  • Does not need to be bolted down
  • May be mounted on a wall or ceiling
  • No calibration is required

Electrical Motor Specifications

  • Hazardous Duty Enclosure
  • Enclosure meets UL requirements
  • Enclosure is CSA Approved
  • Natl. Elec. Code:
    - Class I, Group D, Division 1 and 2
    - Class II, Group F, Division 1 and 2
    - Class II, Group G, Division 1 and 2
    - Class III, Division 1 and 2
  • 1 1/2 horse power
  • Three Phase
  • 60 Hz cycle
  • 230-460 volts
  • 5.0 amps @ 230 V
  • 2.5 amps @ 460 V
  • 1.0 Service Factor

Filters

  • Breathable air inlet can be located up to 300 feet away from the pump
  • Medium efficiency Inlet Filter (particulates large than 25 microns filtered out of the air supply). Replace after 500 operational hours or less depending on working conditions.
  • Outlet filter is Carbofine with activated carbon. Replace after 200 operational hours or less depending on working conditions.

Respirator Capabilities

  • May be used in conjunction with any manufacture’s supplied air respirators. Check the respirator’s owner’s manual to verify that the cfm output of the pump is adequate.
  • Minimum Air Flow required for each tight-fitting mask style respirator is four (4) cfm
  • Minimum Air Flow required for each hood style respirator is six (6) cfm

Warranty 1 year limited warranty to original purchaser from date of purchase


Net Orders Checkout

Item Price Qty Total
Subtotal $0.00
Shipping
Total

Shipping Address

Shipping Methods